De-flame Eps Insulation Acid Spray Coating Equipment

De-flame Eps Insulation Acid Spray Coating Equipment


Send Inquiry

Product Details

automatic coating machine.jpg


De-flame eps block factory uses Insulation acid spray coating equipment to do beads coating. The de-flame degree can reach B2, B1, and A. The coating acid for the styrofoam spray foam equipment should be stored in the suitable place, The customer can make the acid by themselves according to their inquiry. In the machine there is a mixing vessel for mixing the acid. The acid will be infeed the machine preciously by the air and pneumatic.

The coating acid mixed in the beads will decide the gravity of final product, so the customer must pay much attention on it, if the gravity is too big, the block is easy to fall down from the wall. But if the acid component is too small, the de-flame degree will be impacted. The de-flame degree will be tested by the professional bureau, only if the customer get the certificate, can they produce.

 


Technical Data:

 

 

Item

Unit

data

Pressure

Steam

Pressure(kg/c㎡)

5-6

Diameter(Inch)

3”;

Air

Pressure(kg/c㎡)

5-6

Diameter(Inch)

3”;

Acid

Pressure(kg/c㎡)

2.5-3

Diameter(Inch)

1½”;

Hardner

Pressure(kg/c㎡)

2.5-3

Diameter(Inch)

1”;

Exhaust

Diameter(Inch)

3”;

Tank Volumn

3-4

1st dryer

3-4

2nd dryer

3-4

EPS Input

3-4

General Power

KW

120

Details:

Mixing vessel are polished preciously so that no material be stick on the serface..jpgDelivery.jpg

Mixing Vessel Are Polished Preciously So That

 No Material Be Stick On The Serface

Delivery
Mixing shafts are coated with special Teflon layer.jpgAcid vessels are made of qualified ss 304..jpg
Mixing Shafts Are Coated With Special Teflon LayerAcid Vessels Are Made Of Qualified ss 304


Inquiry

  • Your Name:
  • *E-mail:
  • Phone:
  • Company:
  • Title:
  • *Content: