How to keep the gravity accuracy of the expanded beads from the eps foam beads expanding machine is very important. At first the operator must know the character of the raw material and set the parameter of the full automatic eps expander machine correctly. It is known that the raw material character of each batch is not the same sometime, if the expanded gravity is out of tolerance, the operator must stop the machine and check the problem, then set the machine data carefully, such as steam pressure, infeed weight, etc. After the gravity becomes stable, the data must be recorded for future use.
The gravity of the beads from the eps insulation foam expanding machine is small normally, the gravity is not so difficult to control, but the beads dimension is important, the beads diameter need to be controlled as the same or else it will be a problem on the next step—F.R. eps block molding machine. So the qualified raw material is a must, then the parameter setting is also important.
|Panasonic PLC||PID Valve from Germany-new|
|Cabinet Assembled |
Main Shaft And
TYPE YF3000 Pre-expanding
Machine For One Customer
|Side Discharge Door||Bottom Discharge Door||Pneumatic Cabinet|
Angle Valves Are All Imported
From Gemu Germany
Specially Designed Heating Plates
Ensure The Best Heating
|Sepcially Designed Brushing System |
Ensures Prefect Brushing Effect
|Leveling Sensor Control Box||Loading For Shipment||Shipment To The Customer|