Automatic Eps foam pre expander with the 2nd step pre-expanding function is very useful for EPS sandwich panel factories. In these factories it is not enough for 1st step only pre-expanding by eps sheet material expanding machine because the gravity is not suitable for the sandwich panel. So the expanded beads will be stored in the temporary silo, than re-infeed in the eps panel beads pre expander fro expanding.
But this method has one shortcoming, it occupies the productivity of the machine, because if the 2nd Step expanding is on going, the 1st step expanding cannot continue. This is not suitable for the big scale factory.
In order to solve the problem, the customer can buy one small type continuous eps pre-expanding machine only for 2nd step expanding. If like this, both machines can run at the same time, the productivity will be improved much.
|Panasonic PLC||Formula Storage System|
|Cabinet Assembled |
Main Shaft And
TYPE YF3000 Pre-expanding
Machine For One Customer
|PID Valve --Gemu|
|Side Discharge Door||Bottom Discharge Door||Pneumatic Cabinet|
Angle Valves Are All Imported
From Gemu Germany
Specially Designed Heating Plates
Ensure The Best Heating
|Sepcially Designed Brushing System |
Ensures Prefect Brushing Effect
|Leveling Sensor Control Box||Loading For Shipment||Shipment To The Customer|