high density eps foam pre-expanding machine can expand the beads of high density. The diameter of the vessel of this kind of eps beads expanding machine is normally less than 1100mm because the bigger diameter will impact the steam flow in the vessel. But the eps wall panels beads expanding machine can have bigger vessel diameter because the density of the beads is lower. The customer needs to select the eps microbeads expanding machine with the right type. WINPLUS machinery Company technical engineer will have detailed discussion with the customer and will give the suitable plan for the customer.
The most important point for the automatic pre eps foam expanding machine with high density is the steam control. In order to keep the accurate beads density, the steam flow must be controlled preciously accordingly, thus the PID steam valves are necessary. The PID steam valves opening rate can be controlled preciously by PLC according to the temperature and pressure in the vessel of eps expansion machine.
|Panasonic PLC||PID Valve from Germany-new|
|Cabinet Assembled |
Main Shaft And
TYPE YF3000 Pre-expanding
Machine For One Customer
|Side Discharge Door||Bottom Discharge Door||Pneumatic Cabinet|
Angle Valves Are All Imported
From Gemu Germany
Specially Designed Heating Plates
Ensure The Best Heating
|Sepcially Designed Brushing System |
Ensures Prefect Brushing Effect
|Leveling Sensor Control Box||Loading For Shipment||Shipment To The Customer|