Winplus Machinery leads high-quality products development by the excellent cost performance and credit and gets praise from customers
Material weight measuring section takes special measuring controlling device and loading device, they are controlled by touch screen and PLC, the infeed amount can be controlled accurately, the tolerance can be the smallest (±0.05Kg)
For the material level controlling, the machine takes vibration induction controller which is imported from Korea, it can feel the rising rate of the beads, keeps the expanding density as the min, rate(tolerance ±1% for 18-25g)
There is temperature controlling device in the pre-expanding vessel, it can control the temperature change into smallest level so that it can save the heat energy.
Steam-water discharge device can avoid the solidification of the water and the lumping of the foam, thus it can reduce the water entrainment rate of the material.
When emergency accident happens, e.g power off or there are some serious problems with the machine, the steam valve can be automatically close immediately, at the same time, the air can be infeed in the vessel automatically in case the material be lumped in the vessel. this can give double insurance for the product quality
Friendly MMI. Touch screen can automatically detect the default and send out alarm in order to inform the default position and repairing method, this will make maintenance more easy and quick.
The equipment can be operated easily. The operator can set feeding weight and other relevant parameters according to different material and their different density, and the setting can be saved freely, this can help the operator output directly during next cycle, this can improve the working efficiency as much as possible.
The heating base plate is made of high quality stainless steel and after precious laser cutting. During heating , the steam can pass through the base plate more smoothly and equivalently, this can make pre-expanding density more stable, the parcels will be more even, the steam exhaust can be reduced accordingly, this can save the material cost and energy cost as much as possible