Full Automatic Vacuum Block Molding Machine--Normal Block
Full Automatic Vacuum Block Molding Machine--F.R Block
There is a kind of liquid which can help the molded blocks out of the chamber of eps block molder and it can avoid the stick of the block with the steam plates. Before do the molding, the operator can put some acid in the steam plates of the eps foam molder, then after molding, the block can be output from the chamber very easily. If using traditional method, the block will be stick with the steam plates, it is very difficult to clean the steam plates. By using this liquid, the working efficiency is improved much, and the molded block surface quality is very good.
Normally this liquid only needs to be put by every 10 pcs blocks, or if there is the stick phenomenon happens. It will not be any hazard on the block surface, and it will not damage the steam plates. And because the liquid is absorbed by the eps foam and the steam, so it will not impact the environment either.
WINPLUS offers the best solution for EPS block molding：
WINPLUS offers the best solution for EPS shape molding：
Workshop Plan for EPS Block Factory:
|Block Seperation||Feeding Guns From Korea||Strong Vacuum|
|Block Width Adjustable||EPS Raw Beads Mixing|
|CNC Precious Machining||Loading|
|Pressing Function||Steam Plates After Precious Fitting|