- Apr 04, 2017 -
A new technique of heat transfer film print, the process comprises the following steps: adding a thermal printing film, the equipment in the rubber tile by baking heating equipment in the start switch, the equipment under cylinder to the heating of the wheel on the transfer film on the compression to the transferee, until the completion of the transfer, the motor starts to roll film roll film; complete thermal transfer action under cylinder back to in situ; film to transfer film induction electric eye length, laminating machine stop film; unloading hose after transfer; good for the transfer hose. Heat transfer film hose printing and in the previous hose printing process comparison, no printing color difference, imprint effect is good, the color is diverse and very bright. The dot is good, the stereoscopic feeling is strong, the printing pattern is vivid and the brightness is good.
The new printing process of heat transfer film hose is a new kind of hose printing process, which is based on the purchase of the existing equipment and adopts the new printing process:
(1) adding a thermal printing film, the equipment in the rubber tile by baking and heating equipment in the;
(2) starting switch;
(3) equipment under the pressure of the cylinder heating of the wheel on the transfer film on the compression to the transferee, until the completion of the transfer, the heat transfer film by high temperature and pressure, and the rubber hose heat transfer film on bonding, is complete and firmly affixed to the hose.
(4) roll film motor begins to roll film;
(5) complete the heat transfer action, and press the cylinder back to the original position;
(6) film to transfer film induction electric eye length, stop film;
(7) remove the hose after the transfer;
(8) a hose with a good film to be transferred;
(9) go back to step 1.