- Oct 28, 2017 -
In the daily use of jet mill tend to focus only on the use effect of the product and not pay too much attention to details, sometimes users of the jet mill aspects of knowledge is very small, so will cause some small problems in the operation of the standard, the jet mill can not play the greatest effect in use in the process, followed by the small make up to introduce the life of maintenance.
1. During the production process, the temperature rise of the bearing must be checked regularly. When the temperature is higher than 50 degrees, the machine should be checked off to find out the reason and eliminate the trouble.
2. When the new machine is running, the driving belt is easy to elongate, and the proper tightness of the belt should be adjusted to ensure the working life of the belt.
3, wearing parts should be regularly checked, timely replacement, to ensure production quality and production.
4, the blade, lining ring to regularly check the wear, if the wear, productivity decline, coarse grain, found after wear is replaced.
5, the main engine and the classification of mobile bearings are grease lubrication, the use of special grease No. 2, degree 265-295.
6, the bearing grease change period is 2000 hours, the amount of grease filling space for the bearing cavity 1/2 (upper test) or 3/4 (lower test) cut not too much to fill the grease, otherwise it will cause the bearing temperature is too high.
7, screw feeder for 4000 hours, plus ordinary calcium base grease.