The daily maintenance of the EPS Block Molding Machine

- Aug 17, 2014 -


EPS block molding machinery and equipment are basically made of metal, in the maintenance must pay attention to anti-oxidation. Oxidation conditions are water and oxygen, because the air can not be isolated, then only the machine in a dry environment can prevent oxidation. EPS block molding machine  has a device called an air filter. If you keep the water inside the equipment, you can control the drying and maintenance of the whole environment. The first step should check whether there is any water inside the equipment. If rust is produced, rust and clear paint should be clear. The second part is to see whether the entire machine is damaged or whether the important parts of the contact parts of the screw is loose, such checks can prevent the machine damage caused by the security risks, the daily maintenance of the most important.


Related Industry Knowledge

Related Products

  • EPS Crushing Machine Can Do Box Crusher in Curshing Plant
  • Safety Of Eps Foam Crusher Machine
  • High Accurate Eps Expanding Machine
  • Precious Weighting System In WINPLUS Pressurized Expander
  • WINPLUS F.R. Eps Beads Coating Machine
  • Strict Quality Check For Hot Saled WINPLUS Pre-expander Machine